Implant Hex Driver

It’s a must-have for dental professionals.

Torque Wrench: 15-60N.cm
Short drivers length: 20mm
Long drivers length: 25mm
Drivers 0.9 (Long+Short): suitable for use with Xive implant system
Drivers 1.0(Long+Short): suitable for use with Ankylos implant system
Drivers 1.2(Long+Short): suitable for use with Osstem/3i/Megagen/Neobiotech/Datsing implant systems
Drivers 1.25(Long+Short): suitable for use with cortex implant system
Drivers 1.27(Long+Short): suitable for use with Dentium/Dentis/BEGO/Astra/KJ MEDITECH/Zimmer/Mis/Adin/Biohorizon/Alpha Bio Tech implant systems
Drivers 1.4(Long+Short): suitable for use with ICX implant system
Drivers R155 (NOB) (Long+Short): suitable for use with Nobel implant system
Drivers R165 (Long+Short): suitable for use with Strauman/ITI Implant systems

1 x Torque wrench
16 x Drivers ( 2 x 0.9mm Hex Drivers, 2 x 1.0mm Hex Drivers, 2 x 1.2mm Hex Drivers, 2 x 1.25mm Hex Drivers, 2 x 1.27 Hex Drivers, 2 x 1.4mm Hex Drivers, 2 x NOB Driver, 2 x ITI Driver)
1 x Box
1 x Manual

* Sterilization: Before use, autoclave the hex driver at 134°C to ensure it is sterile.
* Implant Placement: Align the hex tip with the implant fixture to engage the internal hex connection of the implant. Make sure the driver fits snugly into the implant for a secure grip.
* Apply Gentle Pressure: Activate the handpiece and gently apply pressure while rotating the driver. For implant placement, the driver helps guide the implant screw into the osteotomy site.
* Screw Tightening: For tightening the implant abutment or screw, slowly apply light pressure while ensuring

Warranty is not applicable for this product.