LogoLogo
Search over 1,000 Dental Products

Would you like to tell us about the product?

regular-abutment
Variant

Brand : Smart Dental Innovations

0.0
0 Reviews

A dental abutment is a small component that connects the implant fixture (the part embedded in the jawbone) to the final prosthesis — a crown, bridge, or denture. A “regular” (or “standard/straight”) abutment is a prefabricated, off-the-shelf abutment designed for typical implant placements where no special angulation or custom shape is needed. On DentalKart, these are listed under their Implant Prosthetics/Implant Abutment section.

Delivery Details
location pin
Product Highlights
  • How to use: After implant osseointegration, seat the abutment onto the implant fixture and secure with the specified torque. Verify fit and emergence profile before final prosthetic placement.
  • Material: Manufactured from Grade 5 Titanium (Ti-6Al-4V) offering high strength, corrosion resistance, and proven biocompatibility.
  • Compatibility: Designed for 4.0 mm implant platforms and compatible with major implant systems; confirm system interface prior to ordering.
  • Sterilization & Packaging: Supplied in sterile, single-use packaging. Follow clinic protocol for handling; do not use if the sterile barrier is damaged.
  • Dimensions & Tolerances: Outer diameter 4.0 mm, height 10.5 mm (1.05 cm). Manufacturing tolerances ±0.02 mm to ensure consistent prosthetic fit.
  • Manufacturer & Warranty: Produced by DentalTech Labs. Includes 1-year warranty against manufacturing defects when used according to instructions.
No
Connection type (internal vs external; conical vs platform-match, etc) Determines how the abutment locks to the implant; affects stability and risk of micro-gap or screw loosening. Material (Titanium, Titanium-alloy, Zirconia/ceramic, etc.) Affects strength, biocompatibility, and aesthetics. Titanium is strong and durable; ceramic/zirconia gives better esthetics but lower strength. Abutment height / gingival cuff height Needs to match tissue thickness so crown emerges properly from gum. Incorrect height can compromise gum health or aesthetics.
Prepare Implant Site Ensure the implant has fully osseointegrated and the site is clean and free of debris. Select Appropriate Abutment Choose the correct height and diameter matching the implant platform. Seat the Abutment Position the abutment onto the implant connection and ensure proper alignment. Tighten the Abutment Screw Use the recommended torque wrench. Typical torque: 25–30 Ncm (depending on manufacturer guidelines). Verify Fit Check stability and confirm that the abutment is fully seated with no rotation. Proceed with Prosthetic Restoration Take impression (if required) or place the final crown/bridge after lab fabrication.
Smart Dental Innovation Benefits
SecurePayment
Hassle FreeCancellation*
7 DaysReplacement*
100%Genuine
COD
Net Banking
Partial Payment
Credit / Debit cards

Would you like to tell us about the product?

Want to buy even more quantity ?
FAQs
question
How does the regular-abutment work?

Answer: Once the implant fixture integrates with the jawbone, the regular-abutment is seated on top and secured with specified torque, creating a stable foundation for prosthetic dental restorations.

question
What material is the regular-abutment made from?

Answer: It is manufactured from grade 5 titanium (ti-6al-4v), which provides high strength, corrosion resistance, and excellent biocompatibility.

regular-abutment
Variant

Brand : Smart Dental Innovations

0.0
0 Reviews

A dental abutment is a small component that connects the implant fixture (the part embedded in the jawbone) to the final prosthesis — a crown, bridge, or denture. A “regular” (or “standard/straight”) abutment is a prefabricated, off-the-shelf abutment designed for typical implant placements where no special angulation or custom shape is needed. On DentalKart, these are listed under their Implant Prosthetics/Implant Abutment section.

Delivery Details
location pin
Product Highlights
  • How to use: After implant osseointegration, seat the abutment onto the implant fixture and secure with the specified torque. Verify fit and emergence profile before final prosthetic placement.
  • Material: Manufactured from Grade 5 Titanium (Ti-6Al-4V) offering high strength, corrosion resistance, and proven biocompatibility.
  • Compatibility: Designed for 4.0 mm implant platforms and compatible with major implant systems; confirm system interface prior to ordering.
  • Sterilization & Packaging: Supplied in sterile, single-use packaging. Follow clinic protocol for handling; do not use if the sterile barrier is damaged.
  • Dimensions & Tolerances: Outer diameter 4.0 mm, height 10.5 mm (1.05 cm). Manufacturing tolerances ±0.02 mm to ensure consistent prosthetic fit.
  • Manufacturer & Warranty: Produced by DentalTech Labs. Includes 1-year warranty against manufacturing defects when used according to instructions.
No
Connection type (internal vs external; conical vs platform-match, etc) Determines how the abutment locks to the implant; affects stability and risk of micro-gap or screw loosening. Material (Titanium, Titanium-alloy, Zirconia/ceramic, etc.) Affects strength, biocompatibility, and aesthetics. Titanium is strong and durable; ceramic/zirconia gives better esthetics but lower strength. Abutment height / gingival cuff height Needs to match tissue thickness so crown emerges properly from gum. Incorrect height can compromise gum health or aesthetics.
Prepare Implant Site Ensure the implant has fully osseointegrated and the site is clean and free of debris. Select Appropriate Abutment Choose the correct height and diameter matching the implant platform. Seat the Abutment Position the abutment onto the implant connection and ensure proper alignment. Tighten the Abutment Screw Use the recommended torque wrench. Typical torque: 25–30 Ncm (depending on manufacturer guidelines). Verify Fit Check stability and confirm that the abutment is fully seated with no rotation. Proceed with Prosthetic Restoration Take impression (if required) or place the final crown/bridge after lab fabrication.
Smart Dental Innovation Benefits
SecurePayment
Hassle FreeCancellation*
7 DaysReplacement*
100%Genuine
COD
Net Banking
Partial Payment
Credit / Debit cards

Would you like to tell us about the product?

Want to buy even more quantity ?
FAQs
question
How does the regular-abutment work?

Answer: Once the implant fixture integrates with the jawbone, the regular-abutment is seated on top and secured with specified torque, creating a stable foundation for prosthetic dental restorations.

question
What material is the regular-abutment made from?

Answer: It is manufactured from grade 5 titanium (ti-6al-4v), which provides high strength, corrosion resistance, and excellent biocompatibility.

Related Products
a
Physio Dispenser Infusion Set

variant available from

₹450

₹290

36% OFF

a
Youni Flexi Extension Clamp (Pack of 2), Molar & Premolar

variant available from

₹1,500

₹1,200

20% OFF

a
Implant Tool Sterilizing Box

variant available from

₹850

₹590

31% OFF

a
Granulation Tissue Removal Bur, 3mm

variant available from

₹1,050

₹990

6% OFF

a
Anterior & Posterior Ivory Tooth Separator, Anterior

variant available from

₹1,800

₹1,299

28% OFF

a
BONE POLISHING BUR

variant available from

₹1,090

₹990

9% OFF

a
Bone Profile Drill, 5.2 mm

variant available from

₹1,090

₹990

9% OFF

Buy onWhatsApp
Buy Now
STAY CONNECTED
Over 203k+ Followers
ABOUT
Contact UsAbout UsCareers
CONTACT WITH US
Buying GuideBulk Price Inquiry
HELP
OrdersRefundsPayments
POLICY
Return PolicyTerm Of UsePrivacySitemap
REGISTERED OFFICE ADDRESS
Third floor, Swastik Plaza, 308, Savlia Cir, Yogi Chowk Ground, Chikuwadi, Varachha, Surat, Gujarat 395006
+919328762586
smartdentalinnovations.web@gmail.com
Mon to Sat (10:00 AM to 7:00 PM)
CREDIT/DEBIT CARDCREDIT/DEBIT CARD
NET BANKINGNET BANKING
UPIUPI
4.5Average online rating

2016-2025, SMART DENTAL INNOVATION•Crafted with ♥ in India