No

Platform / Connection Type: Internal Hex (Dentium standard) Diameter (Platform / Emergence Profile): The online listing shows D4.5 mm and D5.5 mm variants for platform diameter. Gingival Height (GH): Multiple options listed — e.g. GH = 1.0 mm, 1.5 mm, 2.5 mm, 3.5 mm, 4.5 mm (depending on variant) in combination with D4.5 mm. Abutment Height (AH): 5.5 mm (for the variants listed) Material Titanium (consistent with Dentium implant system materials — e.g. Grade 4 or medical-grade Ti) Compatibility: Compatible with Dentium implant systems (e.g. SuperLine / Implantium series) using internal-hex connection. Intended Use: For single-unit crowns or small bridges (FDPs), cement-retained or screw-retained prosthetics attached to implant fixtures

Expose implant and remove healing abutment using the appropriate driver. Seat the regular abutment onto the implant connection; verify full seating visually and radiographically. Tighten prosthetic screw using a compatible torque wrench. Recommended torque: 20–30 Ncm (as per Dentium guidelines). Check abutment position for alignment and occlusal clearance. Proceed with impression-taking or crown placement as required.

1️⃣ Attach the SB1 tip to the ultrasonic scaler handpiece using the torque wrench.
2️⃣ Select appropriate mode (Scaling / Endo) on the ultrasonic scaler.
3️⃣ Adjust power level (low to medium) for controlled vibration.
4️⃣ Keep continuous water flow to cool the tip and tooth.
5️⃣ Gently move the tip along the tooth or cavity surface.
6️⃣ Avoid vertical pressure or excessive force to prevent tooth or tip damage. 

SB1 Tip × 1 PC 

Model: SB1

Material: Medical-grade stainless steel

Function: Removal of calcification and defective filling material from pulp cavity